Mapei Elastorapid Adhesive Two Component

Elastorapid is a two-component adhesive available in grey or white consisting of a special binder and selected silica sand
(comp. A) and a synthetic latex rubber (comp. B).
When the two components are mixed together, a mortar with the following characteristics is obtained:
• low viscosity, therefore easy to apply;
• highly thixotropic: Elastorapid may be applied on vertical surfaces without sagging, and even large-sized, heavy tiles do
not slip. Tiles may be laid starting from the top of the surface without using spacers;
• the pot-life of the mix is particularly long compared with other fast-setting adhesives (60-75 minutes), making the laying
operation easier even during the summer at high temperatures;
• good capacity for accommodating deformation of the substrate and tiles (chipboard, exterior grade plywood, concrete,
ELASTORAPID
Two-component, high-performance, highlydeformable,
quick-setting and drying cementitious
adhesive with no vertical slip and extended open
time for ceramic tiles and stone material.
etc.);
• perfect bonding to all materials normally used in building;
• thicknesses of up to 10 mm set without shrinkage and without a reduction in thickness, until a considerably high
mechanical strength is reached.
Elastorapid has high bonding strength after only 2-3 hours therefore, floor and wall coverings may be put into service very
quickly.