Mapei Keracolor SF Grout

Recommended For:
Internal and external grouting of floors and finishes in all types of ceramic (single-fired, double-fired, klinker, porcelain, etc.).
Grouting stone material (natural stone, marble, granite, agglomerates, etc.).
Grouting glass and marble mosaic.

Not Recommended For:
Mixing Keracolor SF with cement or other products, and never adding water once it has started to set.
Mixing Keracolor SF with salt-water or dirty water.
Using the product at temperatures outside the range of +5°C to +35°C.
Allowing too much mixing water or residual humidity in the adhesive or mortar, which may cause unsightliness due to the formation of salts on the surface.
Filling expansion and movement joints on walls and floors with Keracolor SF.
Grouting tile joints wider than 4 mm with Keracolor SF (use Keracolor FF or Keracolor GG instead).
For tiles or slabs of stone material with micro-porosity or a rough surface, conducting a preliminary test on a small piece to check whether it may be easily cleaned. If necessary, treating the surface with a protective treatment to ensure that it does not run into the tile joints.
Using Keracolor SF with particularly absorbent tiles and thin tile joints without dampening the finish before grouting.

MAPEI Delivery Costs:

Standard Delivery (within 72 hours):
• Charged at £20 ex VAT per pallet
• Carriage is paid if product value meets £500 ex VAT or 1 full pallet of the same product
• Orders must be received by 2:00pm

Next Day Delivery:
• Charged at £35.00 ex VAT per pallet.
• Orders must be received before 1:00pm.

FORS deliveries
• All deliveries requiring FORS certification will be charged at £100 ex VAT per delivery