🛒 Trade Counter Now OPEN Visit 🛒

Mapei  |  SKU: 4B10005A

Mapei Keracolor SF Grout

£8.89
inc VAT
£7.41 ex VAT
£8.94


MAPEI Minimum Order Notice!
This product is dispatched directly from our supplier, a minimum order of £120 ex VAT is required.

Uses

Recommended For:
Internal and external grouting of floors and finishes in all types of ceramic (single-fired, double-fired, klinker, porcelain, etc.).
Grouting stone material (natural stone, marble, granite, agglomerates, etc.).
Grouting glass and marble mosaic.

Not Recommended For:
Mixing Keracolor SF with cement or other products, and never adding water once it has started to set.
Mixing Keracolor SF with salt-water or dirty water.
Using the product at temperatures outside the range of +5°C to +35°C.
Allowing too much mixing water or residual humidity in the adhesive or mortar, which may cause unsightliness due to the formation of salts on the surface.
Filling expansion and movement joints on walls and floors with Keracolor SF.
Grouting tile joints wider than 4 mm with Keracolor SF (use Keracolor FF or Keracolor GG instead).
For tiles or slabs of stone material with micro-porosity or a rough surface, conducting a preliminary test on a small piece to check whether it may be easily cleaned. If necessary, treating the surface with a protective treatment to ensure that it does not run into the tile joints.
Using Keracolor SF with particularly absorbent tiles and thin tile joints without dampening the finish before grouting.

Delivery and Shipping

MAPEI Delivery Costs:

Standard Delivery (within 72 hours):
• Charged at £20 ex VAT per pallet
• Carriage is paid if product value meets £500 ex VAT or 1 full pallet of the same product
• Orders must be received by 2:00pm


Next Day Delivery:
• Charged at £35.00 ex VAT per pallet.
• Orders must be received before 1:00pm.


FORS deliveries
• All deliveries requiring FORS certification will be charged at £100 ex VAT per delivery

Mastic Calculator

Mastic Sealant Calculator

Keracolor SF is made up of a blend of cement, fine-grained inert materials, synthetic resins, special admixtures and
pigments. Keracolor SF is characterised by its special rheological behaviour, which makes it particularly suitable for
grouting narrow tile joints.
When mixed with water in the proportions recommended and correctly applied, it forms a grouting mortar with the
following characteristics:
• good compressive and flexural strength and good resistance to freeze/thaw cycles, and therefore optimum durability;
• smooth, compact finished surface with a very fine grain structure, with low water absorbency and therefore easy
cleaning;
• very good resistance to abrasion;
• low shrinkage rate, therefore free of cracks and crevices.
By mixing Keracolor SF with Fugolastic, a special synthetic resin-based polymeric admixture, its final characteristics are
further improved and it reaches a level of strength which makes it suitable for even the most severe service conditions
(grouting façades, high demand leisure pools, power showers and even floors subject to intense traffic). Keracolor SF
together with Fugolastic admix may also be used for grouting joints in marble to be polished after laying.
For further information, please refer to the Fugolastic Technical Data Sheet.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product comparison grid

A table comparing the facets of 4 products
Facet
Three tubes of Rockwool FirePro firestop sealant with red and white labeling on a white background. Two tubes are standing upright with nozzle attachments, and one tube is lying horizontally in front.
Acoustic Intumescent Sealant - 310ml
View details
ARBO Arbomeric MP20 Sealant 380ml
View details
ARBO Arbosil 1090S Silicone Sealant 380ml
View details
Arbo Arbosil XL 1099 Non-Staining Silicone 380ml
View details
By
ByRockwoolArboArboArbo
Price
Price
£4.56
inc VAT
£3.80 ex VAT
From £9.24
inc VAT
£7.70 ex VAT
From £10.00
inc VAT
£8.33 ex VAT
From £17.94
inc VAT
£14.95 ex VAT
Description
DescriptionGuidelines advise that the spread of fire inside a building can be minimised when provisions are made for elements of... Suitable For: Structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas. Area of... Suitable For: Adhesion to concrete, brickwork, metals and many other common construction substrates. Area of use: INT & EXT Application... Arbosil 1090 is a one part Low Modulus Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to...
Uses
Uses
Advantages
• Up to 4 hours fire resistance
• Easily applied cartridge application
• Sealing joints up to 40mm
• Suitable with multiple substrates
• Suitable in joints with high movement capability
• Durable – Up to 25 years service
Arbomeric MP20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas.
Recommended for use in many construction applications including curtain walling, both original and remedial perimeter sealing, structural joints in light cladding, profiled
metal roof sheets, joints in flat roof systems and guttering joints. NB: Not recommended for overpainting, use with laminated glass and use against natural stone
-
A 5kg bag of Mapei Keracolor SF grout on a plain background.
Mapei

Mapei Keracolor SF Grout

From £8.89
inc VAT
£7.41 ex VAT
£8.94

Keracolor SF is made up of a blend of cement, fine-grained inert materials, synthetic resins, special admixtures and
pigments. Keracolor SF is characterised by its special rheological behaviour, which makes it particularly suitable for
grouting narrow tile joints.
When mixed with water in the proportions recommended and correctly applied, it forms a grouting mortar with the
following characteristics:
• good compressive and flexural strength and good resistance to freeze/thaw cycles, and therefore optimum durability;
• smooth, compact finished surface with a very fine grain structure, with low water absorbency and therefore easy
cleaning;
• very good resistance to abrasion;
• low shrinkage rate, therefore free of cracks and crevices.
By mixing Keracolor SF with Fugolastic, a special synthetic resin-based polymeric admixture, its final characteristics are
further improved and it reaches a level of strength which makes it suitable for even the most severe service conditions
(grouting façades, high demand leisure pools, power showers and even floors subject to intense traffic). Keracolor SF
together with Fugolastic admix may also be used for grouting joints in marble to be polished after laying.
For further information, please refer to the Fugolastic Technical Data Sheet.

Colour

View product