🛒 Trade Counter Now OPEN Visit 🛒

Mapei  |  SKU: 6310003

Mapei Kerapoxy CQ Epoxy Tile Grout

£38.42
VAT included
£32.02 excluding VAT.
£38.67
VAT included


Uses

Recommended For:
Even if it already seems clean after passing over the surface with a rubber float, always clean the surface using a Scotch-Brite pad and water, to emulsify traces of resin on the surface which could otherwise affect the final surface finish.
Use Kerapoxy IEG to grout ceramic and where floor finishes will be subject to attack by oleic acids (ham curers, sausage factories, oil mills, etc.) and aromatic hydrocarbons.
Use a flexible sealant from the MAPEI range (such as Mapesil AC, Mapesil LM or Mapeflex PU 45 FT) for flexible expansion joints or for joints subject to movement.


Not Recommended For:
Kerapoxy CQ does not guarantee perfect bonding if the edges of the tiles are wet or contaminated with cement, dust, oil, grease, etc. during grouting.
Do not use Kerapoxy CQ to grout terracotta tiles, the finish of the tiles may be affected.
Always carry out preliminary tests before grouting stone or ground porcelain with a porous or rough surface.
Do not add water or solvents to Kerapoxy CQ to increase its workability.
Use the product at temperatures between +12°C and +30°C. However, at temperatures below +15°C application may be more difficult.
The packages are pre-dosed and, therefore, it is not possible to make mixing errors if all the contents are mixed together. Do not guess the quantities when mixing the two components: hardening will be compromised if the catalyzing ratio is wrong.
If hardened and Kerapoxy CQ has to be removed from the joints, use an industrial hot air blower. If hardened localized residues of the product remain bonded to the tiles, use Ultracare Epoxy Off Gel for cleaning.

Delivery and Shipping

Free delivery for orders over the value of £350.00.

Mastic Calculator

Mastic Sealant Calculator

Kerapoxy CQ is a two-component, epoxy resin-based product, with silica sand and other special components.
It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent,
preventing the proliferation of bacteria and the formation of mould on the surfaces of grouts, making tiled
surfaces hygienic and safe, thanks to the innovative BioBlock technology developed as a result of MAPEI
research.
This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 Plus by
GEV when used for grouting.
When applied correctly, it produces tile joints with the following characteristics:
▪ excellent mechanical strength and resistance to chemicals, therefore excellent durability;
▪ smooth and compact, surface finish which is non-absorbent and easy to clean; guarantees a high level of
hygiene and inhibits the formation of mildew and mould;
▪ high degree of hardness, excellent resistance to heavy traffic;
▪ no shrinkage and, therefore, no cracking;
▪ uniform colour, resistant to atmospheric agents;
▪ excellent workability, highly improved compared with traditional epoxy mortars thanks to its creamy
consistency, which guarantees faster application times and makes it easier to clean from surfaces, with less
waste and easier to obtain a good finish.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product comparison grid

A table comparing the facets of 4 products
Facet
Three tubes of Rockwool FirePro firestop sealant with red and white labeling on a white background. Two tubes are standing upright with nozzle attachments, and one tube is lying horizontally in front.
Acoustic Intumescent Sealant - 310ml
View details
ARBO Arbomeric MP20 380ml – Box of 25
View details
ARBO Arbosil 1090S 380ml – Box of 25
View details
Arbo Arbosil XL 1099 Non-Staining Silicone 380ml
View details
By
ByRockwoolArboArboArbo
Price
Price
£3.05
VAT included
£2.54 excluding VAT.
From £7.44
VAT included
£6.20 excluding VAT.
From £11.94
VAT included
£9.95 excluding VAT.
From £17.94
VAT included
£14.95 excluding VAT.
Description
DescriptionGuidelines advise that the spread of fire inside a building can be minimised when provisions are made for elements of... Suitable For: Structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas. Area of... Suitable For: Adhesion to concrete, brickwork, metals and many other common construction substrates. Area of use: INT & EXT Application... Arbosil 1090 is a one part Low Modulus Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to...
Uses
Uses
Advantages
• Up to 4 hours fire resistance
• Easily applied cartridge application
• Sealing joints up to 40mm
• Suitable with multiple substrates
• Suitable in joints with high movement capability
• Durable – Up to 25 years service
Arbomeric MP20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas.
Recommended for use in many construction applications including curtain walling, both original and remedial perimeter sealing, structural joints in light cladding, profiled
metal roof sheets, joints in flat roof systems and guttering joints. NB: Not recommended for overpainting, use with laminated glass and use against natural stone
-
Bucket of MAPEI Kerapoxy CQ epoxy grout with blue lid on white background.
Mapei

Mapei Kerapoxy CQ Epoxy Tile Grout

From £38.42
VAT included
£32.02 excluding VAT.
£38.67

Kerapoxy CQ is a two-component, epoxy resin-based product, with silica sand and other special components.
It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent,
preventing the proliferation of bacteria and the formation of mould on the surfaces of grouts, making tiled
surfaces hygienic and safe, thanks to the innovative BioBlock technology developed as a result of MAPEI
research.
This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 Plus by
GEV when used for grouting.
When applied correctly, it produces tile joints with the following characteristics:
▪ excellent mechanical strength and resistance to chemicals, therefore excellent durability;
▪ smooth and compact, surface finish which is non-absorbent and easy to clean; guarantees a high level of
hygiene and inhibits the formation of mildew and mould;
▪ high degree of hardness, excellent resistance to heavy traffic;
▪ no shrinkage and, therefore, no cracking;
▪ uniform colour, resistant to atmospheric agents;
▪ excellent workability, highly improved compared with traditional epoxy mortars thanks to its creamy
consistency, which guarantees faster application times and makes it easier to clean from surfaces, with less
waste and easier to obtain a good finish.

Colour

Size

  • 3kg
  • 10kg
View product