🛒 Trade Counter Now OPEN Visit 🛒

Mapei  |  SKU: 168322

Mapei Mapelastic Foundation

£89.30
VAT included
£74.42 excluding VAT.
£89.86
VAT included


Uses

Recommended For:
Waterproofing concrete and masonry structures exposed to positive or negative hydrostatic pressure.
Foundation walls, underground environments, basins, channels, and swimming pools.
Concrete retaining walls.
Underground structures such as car-parks, cellars, swimming pools, basins, and lift pits.

Not Recommended For:
Coatings requiring a high thickness (more than 2 mm per coat).
Application at temperatures below +5°C.
Substrates saturated with water (surfaces must dry off before application).
Adding cement, inert materials, or water to Mapelastic Foundation.
Exposure to rain and water contact for the first 24 hours after application.

Delivery and Shipping

Free delivery for orders over the value of £350.00.

Mastic Calculator

Mastic Sealant Calculator

Mapelastic Foundation is a two-component mortar based on cementitious binders, fine-grained selected inert materials,
inorganic fibres, special additives and synthetic polymers in water dispersion, blended according to a formula developed
in MAPEI’s own Research & Development laboratories. When the two components are mixed together, a plastic
consistency is obtained. It may be applied with a roller or by spray on both horizontal and vertical surfaces, at a thickness
of at least 2 mm. Thanks to the high content and quality of the synthetic resins, the hardened layer of Mapelastic
Foundation is highly flexible and remains stable under all environmental conditions. When mixed, the product is highly
thixotropic, which reduces waste to a minimum during the application phase with a roller.
Mapelastic Foundation is completely waterproof against positive pressure, and is waterproof against negative pressure of
up to 1.5 atm (15 m column of water). Once cured, it is resistant to soluble salts which are present in sea water or in the
ground, such as chlorides and sulphates.
Mapelastic Foundation also has excellent bonding strength on all cementitious substrates if they have been suitably
prepared. All these properties keep structures protected and waterproofed with Mapelastic Foundation perfectly dry over
the years.
Mapelastic Foundation fulfils all the main criteria for the EN 1504-9 Standards (“Products and systems for the protection
and repair of concrete structures: definitions, requirements, quality control and conformity assessment. General
principles for the use of products and systems”) and the requirements for EN 1504-2 Standards according to PI-MC-IR
principles (“Protection systems for concrete surfaces”).
Product certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product
with very low emission of volatile organic compounds.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product comparison grid

A table comparing the facets of 4 products
Facet
Three tubes of Rockwool FirePro firestop sealant with red and white labeling on a white background. Two tubes are standing upright with nozzle attachments, and one tube is lying horizontally in front.
Acoustic Intumescent Sealant - 310ml
View details
ARBO Arbomeric MP20 380ml – Box of 25
View details
ARBO Arbosil 1090S 380ml – Box of 25
View details
Arbo Arbosil XL 1099 Non-Staining Silicone 380ml
View details
By
ByRockwoolArboArboArbo
Price
Price
£3.05
VAT included
£2.54 excluding VAT.
From £7.44
VAT included
£6.20 excluding VAT.
From £11.94
VAT included
£9.95 excluding VAT.
From £17.94
VAT included
£14.95 excluding VAT.
Description
DescriptionGuidelines advise that the spread of fire inside a building can be minimised when provisions are made for elements of... Suitable For: Structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas. Area of... Suitable For: Adhesion to concrete, brickwork, metals and many other common construction substrates. Area of use: INT & EXT Application... Arbosil 1090 is a one part Low Modulus Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to...
Uses
Uses
Advantages
• Up to 4 hours fire resistance
• Easily applied cartridge application
• Sealing joints up to 40mm
• Suitable with multiple substrates
• Suitable in joints with high movement capability
• Durable – Up to 25 years service
Arbomeric MP20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas.
Recommended for use in many construction applications including curtain walling, both original and remedial perimeter sealing, structural joints in light cladding, profiled
metal roof sheets, joints in flat roof systems and guttering joints. NB: Not recommended for overpainting, use with laminated glass and use against natural stone
-
Bag and canister of Mapelastic Foundation waterproofing products by MAPEI on a white background.
Mapei

Mapei Mapelastic Foundation

From £83.01
VAT included
£69.18 excluding VAT.
£83.53

Mapelastic Foundation is a two-component mortar based on cementitious binders, fine-grained selected inert materials,
inorganic fibres, special additives and synthetic polymers in water dispersion, blended according to a formula developed
in MAPEI’s own Research & Development laboratories. When the two components are mixed together, a plastic
consistency is obtained. It may be applied with a roller or by spray on both horizontal and vertical surfaces, at a thickness
of at least 2 mm. Thanks to the high content and quality of the synthetic resins, the hardened layer of Mapelastic
Foundation is highly flexible and remains stable under all environmental conditions. When mixed, the product is highly
thixotropic, which reduces waste to a minimum during the application phase with a roller.
Mapelastic Foundation is completely waterproof against positive pressure, and is waterproof against negative pressure of
up to 1.5 atm (15 m column of water). Once cured, it is resistant to soluble salts which are present in sea water or in the
ground, such as chlorides and sulphates.
Mapelastic Foundation also has excellent bonding strength on all cementitious substrates if they have been suitably
prepared. All these properties keep structures protected and waterproofed with Mapelastic Foundation perfectly dry over
the years.
Mapelastic Foundation fulfils all the main criteria for the EN 1504-9 Standards (“Products and systems for the protection
and repair of concrete structures: definitions, requirements, quality control and conformity assessment. General
principles for the use of products and systems”) and the requirements for EN 1504-2 Standards according to PI-MC-IR
principles (“Protection systems for concrete surfaces”).
Product certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product
with very low emission of volatile organic compounds.

Type

  • A
  • B
View product