🛒 Trade Counter Now OPEN Visit 🛒

Mapei  |  SKU: 167124

Mapei Mapelastic Mortar

£82.51
VAT included
£68.76 excluding VAT.
£83.03
VAT included


Uses

Recommended For:
Waterproofing and protection of concrete structures, renders, and cementitious screeds.
Waterproofing concrete basins used for containing water.
Waterproofing bathrooms, showers, balconies, terraces, swimming pools, etc., before laying ceramic tile finishes.
Waterproofing plasterboard, render, or cementitious surfaces, lightweight cement blocks, and marine-grade plywood.
Applying a flexible smoothing layer for light-sectioned concrete structures, including those subjected to minor deformation under load (e.g., pre-cast panels).
Protecting renders or concrete with cracks caused by shrinkage against the infiltration of water and aggressive atmospheric elements.
Protection against the penetration of carbon dioxide in concrete pillars, beams, road and railway viaducts repaired with products from the Mapegrout range, and structures with insufficient concrete covering on reinforcement rods.
Protecting concrete surfaces that may come into contact with seawater, de-icing salts (such as sodium or calcium chloride), and sulphates.

Not Recommended For:
Thick coatings exceeding 2 mm per coat, as Mapelastic is designed for thinner applications.
Application at temperatures below +8°C to ensure proper curing and adhesion.
Mixing with cement, aggregates, or water, as it may affect the performance of the product.
Lightweight substrates that may not provide adequate support for the waterproofing layer.
Unprotected surfaces in swimming pools, as Mapelastic is not formulated for continuous submersion.
Exposure to rain and water spillage during the first 24 hours after application to allow proper curing.
Direct sunlight exposure during hot weather conditions, as it may impact the application process.
It is advisable to protect the surface from rapid evaporation after application, especially in dry, hot, or windy weather, by covering it with sheets.

Delivery and Shipping

Free delivery for orders over the value of £350.00.

Mastic Calculator

Mastic Sealant Calculator

Mapelastic is a two-component mortar based on cementitious binders, fine-grained selected aggregates,
special admixtures and synthetic polymers dispersed in water, blended according to a formula developed in
MAPEI’s own research laboratories. When the two components are mixed together, a free-flowing mix is
obtained which may be easily applied, even on vertical surfaces, at a thickness of up to 2 mm in one single
coat.
Due to the high content and quality of the synthetic resins, the cured layer of Mapelastic remains constantly
flexible under all environmental conditions and resistant to the chemical attack of de-icing salts, sulphates,
chlorides and carbon dioxide.
Mapelastic has excellent bonding properties to all concrete, masonry, ceramic and marble surfaces, as long as
they are sound and sufficiently clean.
This property, together with its resistance to the deteriorating effect of UV rays, a characteristic of this product,
ensures that structures protected and waterproofed with Mapelastic have a long service life, even if they are
located in areas with particularly difficult climatic conditions, in coastal areas with a saline rich atmosphere or
industrial areas where the air is particularly polluted.
Mapelastic meets the requirements defined by EN 1504-9 (“Products and systems for the protection and
repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity -
General principles for the use of products and systems”) and the requirements claimed by EN 1504-2 coating
(C) according to the PI, MC and IR principles (“Protection systems for concrete surfaces”).

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product comparison grid

A table comparing the facets of 4 products
Facet
Three tubes of Rockwool FirePro firestop sealant with red and white labeling on a white background. Two tubes are standing upright with nozzle attachments, and one tube is lying horizontally in front.
Acoustic Intumescent Sealant - 310ml
View details
ARBO Arbomeric MP20 380ml – Box of 25
View details
ARBO Arbosil 1090S 380ml – Box of 25
View details
Arbo Arbosil XL 1099 Non-Staining Silicone 380ml
View details
By
ByRockwoolArboArboArbo
Price
Price
£3.05
VAT included
£2.54 excluding VAT.
From £7.44
VAT included
£6.20 excluding VAT.
From £11.94
VAT included
£9.95 excluding VAT.
From £17.94
VAT included
£14.95 excluding VAT.
Description
DescriptionGuidelines advise that the spread of fire inside a building can be minimised when provisions are made for elements of... Suitable For: Structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas. Area of... Suitable For: Adhesion to concrete, brickwork, metals and many other common construction substrates. Area of use: INT & EXT Application... Arbosil 1090 is a one part Low Modulus Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to...
Uses
Uses
Advantages
• Up to 4 hours fire resistance
• Easily applied cartridge application
• Sealing joints up to 40mm
• Suitable with multiple substrates
• Suitable in joints with high movement capability
• Durable – Up to 25 years service
Arbomeric MP20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas.
Recommended for use in many construction applications including curtain walling, both original and remedial perimeter sealing, structural joints in light cladding, profiled
metal roof sheets, joints in flat roof systems and guttering joints. NB: Not recommended for overpainting, use with laminated glass and use against natural stone
-
Mapelastic waterproofing products by Mapei: a white bag and a blue canister side by side.
Mapei

Mapei Mapelastic Mortar

From £78.47
VAT included
£65.39 excluding VAT.
£78.97

Mapelastic is a two-component mortar based on cementitious binders, fine-grained selected aggregates,
special admixtures and synthetic polymers dispersed in water, blended according to a formula developed in
MAPEI’s own research laboratories. When the two components are mixed together, a free-flowing mix is
obtained which may be easily applied, even on vertical surfaces, at a thickness of up to 2 mm in one single
coat.
Due to the high content and quality of the synthetic resins, the cured layer of Mapelastic remains constantly
flexible under all environmental conditions and resistant to the chemical attack of de-icing salts, sulphates,
chlorides and carbon dioxide.
Mapelastic has excellent bonding properties to all concrete, masonry, ceramic and marble surfaces, as long as
they are sound and sufficiently clean.
This property, together with its resistance to the deteriorating effect of UV rays, a characteristic of this product,
ensures that structures protected and waterproofed with Mapelastic have a long service life, even if they are
located in areas with particularly difficult climatic conditions, in coastal areas with a saline rich atmosphere or
industrial areas where the air is particularly polluted.
Mapelastic meets the requirements defined by EN 1504-9 (“Products and systems for the protection and
repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity -
General principles for the use of products and systems”) and the requirements claimed by EN 1504-2 coating
(C) according to the PI, MC and IR principles (“Protection systems for concrete surfaces”).

Type

  • A
  • B
  • A & B
View product