🛒 Trade Counter Now OPEN Visit 🛒

Mapei  |  SKU: 106125

Mapei Nivoplan Interior & Exterior Levelling Mortar

£22.68
VAT included
£18.90 excluding VAT.
£22.82
VAT included


Uses

Recommended For:
Rendering and leveling indoor and outdoor wall and ceiling surfaces.
Suitable for layers with thicknesses ranging from 2 to 20 mm.
Preparing surfaces for the installation of ceramic tiles or paint finishing.
Smoothing walls before installing ceramic tiles.
Repairing old, damaged renders.
Leveling reinforced concrete surfaces of swimming pools and facades before installing ceramic coverings or waterproofing by painting.
Smoothing foamed cement, brick, eraclit, etc. walls.

Not Recommended For:
Gypsum or gypsum-based surfaces, unless prepared with a coat or two of Primer G.
Smoothing floors due to its limited compressive strength.
Applications where high compressive strength is required.

Delivery and Shipping

Free delivery for orders over the value of £350.00.

Mastic Calculator

Mastic Sealant Calculator

Nivoplan is a grey or white powder composed of cement, selected aggregates and special synthetic
resins which, when mixed with water, provide a mix that is easy to apply on vertical surfaces with a trowel
or with a rendering spraying machine.
*Note: The choice of bonding requirement is based around the porosity of the substrate and the required
finishes.
Nivoplan’s bonding properties can be improved by adding Planicrete and water to the product during
mixing, 1-2 litres per bag (used as a partial replacement for the mix water).
The addition of Planicrete is necessary for thin applications over concrete or in cases where the render
will receive tile or natural stone coverings.
*Note: Nivoplan is a normal setting Portland based product. The waiting time to fix tiles is based in the
development of the mechanical strength. Mapei Planicrete is a SBR additive used, when mixed as per the
recommendations:
To improve the mechanical characteristics of cement-based renders.
To improve the adhesive characteristics of cementbased renders.
To provide higher compressive and flexural strengths.
Nivoplan is classified as GP (“General purpose mortar for internal/external render”), category CS IV according
to EN 998-1.
RECOMMENDATIONS
NIVOPLAN
Smoothing mortar for internal and external walls
and ceilings for thicknesses from 2 to 20 mm.
▪ Nivoplan must never be used on gypsum or gypsum-based surfaces, unless those surfaces have been
prepared with a coat or two of Primer G (see relative Technical Data Sheet).
▪ Nivoplan is not suitable for smoothing over floors due to its limited compressive strength. In this case,
please refer to the Technical Data Sheets regarding products for preparing substrates, or contact the MAPEI
Technical Assistance Department.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product comparison grid

A table comparing the facets of 4 products
Facet
Three tubes of Rockwool FirePro firestop sealant with red and white labeling on a white background. Two tubes are standing upright with nozzle attachments, and one tube is lying horizontally in front.
Acoustic Intumescent Sealant - 310ml
View details
ARBO Arbomeric MP20 380ml – Box of 25
View details
ARBO Arbosil 1090S 380ml – Box of 25
View details
Arbo Arbosil XL 1099 Non-Staining Silicone 380ml
View details
By
ByRockwoolArboArboArbo
Price
Price
£3.05
VAT included
£2.54 excluding VAT.
From £7.44
VAT included
£6.20 excluding VAT.
From £11.94
VAT included
£9.95 excluding VAT.
From £17.94
VAT included
£14.95 excluding VAT.
Description
DescriptionGuidelines advise that the spread of fire inside a building can be minimised when provisions are made for elements of... Suitable For: Structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas. Area of... Suitable For: Adhesion to concrete, brickwork, metals and many other common construction substrates. Area of use: INT & EXT Application... Arbosil 1090 is a one part Low Modulus Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to...
Uses
Uses
Advantages
• Up to 4 hours fire resistance
• Easily applied cartridge application
• Sealing joints up to 40mm
• Suitable with multiple substrates
• Suitable in joints with high movement capability
• Durable – Up to 25 years service
Arbomeric MP20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas.
Recommended for use in many construction applications including curtain walling, both original and remedial perimeter sealing, structural joints in light cladding, profiled
metal roof sheets, joints in flat roof systems and guttering joints. NB: Not recommended for overpainting, use with laminated glass and use against natural stone
-
A bag of MAPEI Nivoplan leveling mortar for walls and ceilings in gray color.
Mapei

Mapei Nivoplan Interior & Exterior Levelling Mortar

From £22.68
VAT included
£18.90 excluding VAT.
£22.82

Nivoplan is a grey or white powder composed of cement, selected aggregates and special synthetic
resins which, when mixed with water, provide a mix that is easy to apply on vertical surfaces with a trowel
or with a rendering spraying machine.
*Note: The choice of bonding requirement is based around the porosity of the substrate and the required
finishes.
Nivoplan’s bonding properties can be improved by adding Planicrete and water to the product during
mixing, 1-2 litres per bag (used as a partial replacement for the mix water).
The addition of Planicrete is necessary for thin applications over concrete or in cases where the render
will receive tile or natural stone coverings.
*Note: Nivoplan is a normal setting Portland based product. The waiting time to fix tiles is based in the
development of the mechanical strength. Mapei Planicrete is a SBR additive used, when mixed as per the
recommendations:
To improve the mechanical characteristics of cement-based renders.
To improve the adhesive characteristics of cementbased renders.
To provide higher compressive and flexural strengths.
Nivoplan is classified as GP (“General purpose mortar for internal/external render”), category CS IV according
to EN 998-1.
RECOMMENDATIONS
NIVOPLAN
Smoothing mortar for internal and external walls
and ceilings for thicknesses from 2 to 20 mm.
▪ Nivoplan must never be used on gypsum or gypsum-based surfaces, unless those surfaces have been
prepared with a coat or two of Primer G (see relative Technical Data Sheet).
▪ Nivoplan is not suitable for smoothing over floors due to its limited compressive strength. In this case,
please refer to the Technical Data Sheets regarding products for preparing substrates, or contact the MAPEI
Technical Assistance Department.

Colour

View product